Step-by-Step Guide: How to Use the Rescue Pack to Diagnose Issues

July 12, 2023

Follow this step-by-step guide on how to diagnose issues with the Rescue Pack

Are you experiencing performance issues with your Liberty Trike? Don't worry; we're here to assist you! This comprehensive tutorial will guide you through the process of diagnosing common problems using the Liberty Trike Rescue Pack.

The Rescue Pack is an essential tool for troubleshooting potential issues and includes a new LCD, controller, throttle, and 3-to-1 cable. We will cover everything from disconnecting old cables to properly installing new components, ensuring that all connectors are aligned and undamaged.

Let's begin by addressing the 3-to-1 cable. Start by disconnecting all connections from the top and one connection from the bottom. When reconnecting, ensure that the colors are aligned, and the arrows on the connectors are properly lined up. Take care not to damage any of the connection pins during this process.

Once you've reconnected the bottom cable, observe if the issue persists. If the problem remains unresolved, it's time to move on to the controller. Disconnect the bottom cable and the motor cable on the right, but keep the old controller in place. Attach the corresponding connection points to the new controller, and don't forget to undo the back twist connection and reattach the new connector securely.

Now, verify if the new controller has resolved the issue. If it does, we have a dedicated video that provides detailed guidance on replacing the old controller with the new one.

Next, let's diagnose whether the throttle is causing the problem. Trace the throttle cable down to the connection point and disconnect it from the 3-to-1 cable. Take the new throttle and align the connector's arrows before firmly pressing it in place. Ensure that the connectors are not damaged. Turn on your Liberty Trike, set it to the lowest speed for safety, and test the new throttle to determine if it resolves the issue. For more detailed instructions on replacing the old throttle, refer to our dedicated video.

Moving on, let's address the possibility of the LCD being the source of the problem. Trace the LCD cable down and disconnect it from the 3-to-1 cable. Now, attach the new LCD, ensuring that the arrows and colors on the connectors are correctly aligned. Press firmly to secure the connection. Turn on the LCD and observe if the issue persists. If the problem is resolved, we have a comprehensive video guiding you through the process of replacing your old LCD.

Finally, let's diagnose any potential issues with the brake assembly. Follow the brake connector down and disconnect it from the 3-to-1 cable. Attach the new brake connector, ensuring that the arrows are aligned, and press firmly to establish a secure connection. Turn on the LCD and check if the error persists. If it does, ensure that your brake lock is not engaged. If it is, disconnect the brake lock and test if that resolves the issue.

By following these step-by-step instructions and conducting the necessary tests, you can identify and resolve common issues with your Liberty Trike using the Rescue Pack. If any of the steps in this video help fix your problem, we have additional dedicated videos on our channel that provide more detailed guidance on replacing the old components with the new ones.

Leave a comment

Comments will be approved before showing up.

Customer Reviews for a Liberty Trike
Customer Reviews